 |
36R2-01
LL 1ST MOLAR BAND, CONVERTIBLE TUBE SZ-1 |
| Convertible Roth bracket welded to a band without a lingual cleat. Torque 25, angulation 0, mesial rotation 5. Banding of lower first molars is often easier and more accurate than bonding in cases with limited bonding access. Use this band in non-extraction or first bicuspid extraction cases with skeletal closed bites and class I, class III, or mild class II (2mm or less) occlusions. Do not use this bracket in lower 5 extraction cases, when significant class II elastics are planned, when cinchback mechanics on heavy archwires are expected, and if the molar needs to be uprighted. Other variations will give better results, with less unwanted tooth movements. Conversion of the buccal tube to a bracket is made with the bracket conversion tool, and should be done when the second molars (7s) are banded and heavy wires are engaged. Conversion of the tube must be completed before the start of finishing to allow finishing bends to be made and the archwire removed for further adjustment. |
| *You must be a registered customer to view pricing* |
| |
| |
|
|
|
|
36R2-02
LL 1ST MOLAR BAND, CONVERTIBLE TUBE SZ-2 |
| Convertible Roth bracket welded to a band without a lingual cleat. Torque 25, angulation 0, mesial rotation 5. Banding of lower first molars is often easier and more accurate than bonding in cases with limited bonding access. Use this band in non-extraction or first bicuspid extraction cases with skeletal closed bites and class I, class III, or mild class II (2mm or less) occlusions. Do not use this bracket in lower 5 extraction cases, when significant class II elastics are planned, when cinchback mechanics on heavy archwires are expected, and if the molar needs to be uprighted. Other variations will give better results, with less unwanted tooth movements. Conversion of the buccal tube to a bracket is made with the bracket conversion tool, and should be done when the second molars (7s) are banded and heavy wires are engaged. Conversion of the tube must be completed before the start of finishing to allow finishing bends to be made and the archwire removed for further adjustment. |
| *You must be a registered customer to view pricing* |
| |
| |
|
|
|
|
36R2-03
LL 1ST MOLAR BAND, CONVERTIBLE TUBE SZ-3 |
| Convertible Roth bracket welded to a band without a lingual cleat. Torque 25, angulation 0, mesial rotation 5. Banding of lower first molars is often easier and more accurate than bonding in cases with limited bonding access. Use this band in non-extraction or first bicuspid extraction cases with skeletal closed bites and class I, class III, or mild class II (2mm or less) occlusions. Do not use this bracket in lower 5 extraction cases, when significant class II elastics are planned, when cinchback mechanics on heavy archwires are expected, and if the molar needs to be uprighted. Other variations will give better results, with less unwanted tooth movements. Conversion of the buccal tube to a bracket is made with the bracket conversion tool, and should be done when the second molars (7s) are banded and heavy wires are engaged. Conversion of the tube must be completed before the start of finishing to allow finishing bends to be made and the archwire removed for further adjustment. |
| *You must be a registered customer to view pricing* |
| |
| |
|
|
|
|
36R2-04
LL 1ST MOLAR BAND, CONVERTIBLE TUBE SZ-4 |
| Convertible Roth bracket welded to a band without a lingual cleat. Torque 25, angulation 0, mesial rotation 5. Banding of lower first molars is often easier and more accurate than bonding in cases with limited bonding access. Use this band in non-extraction or first bicuspid extraction cases with skeletal closed bites and class I, class III, or mild class II (2mm or less) occlusions. Do not use this bracket in lower 5 extraction cases, when significant class II elastics are planned, when cinchback mechanics on heavy archwires are expected, and if the molar needs to be uprighted. Other variations will give better results, with less unwanted tooth movements. Conversion of the buccal tube to a bracket is made with the bracket conversion tool, and should be done when the second molars (7s) are banded and heavy wires are engaged. Conversion of the tube must be completed before the start of finishing to allow finishing bends to be made and the archwire removed for further adjustment. |
| *You must be a registered customer to view pricing* |
| |
| |
|
|
|
|
36R2-05
LL 1ST MOLAR BAND, CONVERTIBLE TUBE SZ-5 |
| Convertible Roth bracket welded to a band without a lingual cleat. Torque 25, angulation 0, mesial rotation 5. Banding of lower first molars is often easier and more accurate than bonding in cases with limited bonding access. Use this band in non-extraction or first bicuspid extraction cases with skeletal closed bites and class I, class III, or mild class II (2mm or less) occlusions. Do not use this bracket in lower 5 extraction cases, when significant class II elastics are planned, when cinchback mechanics on heavy archwires are expected, and if the molar needs to be uprighted. Other variations will give better results, with less unwanted tooth movements. Conversion of the buccal tube to a bracket is made with the bracket conversion tool, and should be done when the second molars (7s) are banded and heavy wires are engaged. Conversion of the tube must be completed before the start of finishing to allow finishing bends to be made and the archwire removed for further adjustment. |
| *You must be a registered customer to view pricing* |
| |
| |
|
|
|
|
36R2-06
LL 1ST MOLAR BAND, CONVERTIBLE TUBE SZ-6 |
| Convertible Roth bracket welded to a band without a lingual cleat. Torque 25, angulation 0, mesial rotation 5. Banding of lower first molars is often easier and more accurate than bonding in cases with limited bonding access. Use this band in non-extraction or first bicuspid extraction cases with skeletal closed bites and class I, class III, or mild class II (2mm or less) occlusions. Do not use this bracket in lower 5 extraction cases, when significant class II elastics are planned, when cinchback mechanics on heavy archwires are expected, and if the molar needs to be uprighted. Other variations will give better results, with less unwanted tooth movements. Conversion of the buccal tube to a bracket is made with the bracket conversion tool, and should be done when the second molars (7s) are banded and heavy wires are engaged. Conversion of the tube must be completed before the start of finishing to allow finishing bends to be made and the archwire removed for further adjustment. |
| *You must be a registered customer to view pricing* |
| |
| |
|
|
|
|
36R2-07
LL 1ST MOLAR BAND, CONVERTIBLE TUBE SZ-7 |
| Convertible Roth bracket welded to a band without a lingual cleat. Torque 25, angulation 0, mesial rotation 5. Banding of lower first molars is often easier and more accurate than bonding in cases with limited bonding access. Use this band in non-extraction or first bicuspid extraction cases with skeletal closed bites and class I, class III, or mild class II (2mm or less) occlusions. Do not use this bracket in lower 5 extraction cases, when significant class II elastics are planned, when cinchback mechanics on heavy archwires are expected, and if the molar needs to be uprighted. Other variations will give better results, with less unwanted tooth movements. Conversion of the buccal tube to a bracket is made with the bracket conversion tool, and should be done when the second molars (7s) are banded and heavy wires are engaged. Conversion of the tube must be completed before the start of finishing to allow finishing bends to be made and the archwire removed for further adjustment. |
| *You must be a registered customer to view pricing* |
| |
| |
|
|
|
|
36R2-08
LL 1ST MOLAR BAND, CONVERTIBLE TUBE SZ-8 |
| Convertible Roth bracket welded to a band without a lingual cleat. Torque 25, angulation 0, mesial rotation 5. Banding of lower first molars is often easier and more accurate than bonding in cases with limited bonding access. Use this band in non-extraction or first bicuspid extraction cases with skeletal closed bites and class I, class III, or mild class II (2mm or less) occlusions. Do not use this bracket in lower 5 extraction cases, when significant class II elastics are planned, when cinchback mechanics on heavy archwires are expected, and if the molar needs to be uprighted. Other variations will give better results, with less unwanted tooth movements. Conversion of the buccal tube to a bracket is made with the bracket conversion tool, and should be done when the second molars (7s) are banded and heavy wires are engaged. Conversion of the tube must be completed before the start of finishing to allow finishing bends to be made and the archwire removed for further adjustment. |
| *You must be a registered customer to view pricing* |
| |
| |
|
|
|
|
36R2-09
LL 1ST MOLAR BAND, CONVERTIBLE TUBE SZ-9 |
| Convertible Roth bracket welded to a band without a lingual cleat. Torque 25, angulation 0, mesial rotation 5. Banding of lower first molars is often easier and more accurate than bonding in cases with limited bonding access. Use this band in non-extraction or first bicuspid extraction cases with skeletal closed bites and class I, class III, or mild class II (2mm or less) occlusions. Do not use this bracket in lower 5 extraction cases, when significant class II elastics are planned, when cinchback mechanics on heavy archwires are expected, and if the molar needs to be uprighted. Other variations will give better results, with less unwanted tooth movements. Conversion of the buccal tube to a bracket is made with the bracket conversion tool, and should be done when the second molars (7s) are banded and heavy wires are engaged. Conversion of the tube must be completed before the start of finishing to allow finishing bends to be made and the archwire removed for further adjustment. |
| *You must be a registered customer to view pricing* |
| |
| |
|
|
|
|
36R2-10
LL 1ST MOLAR BAND, CONVERTIBLE TUBE SZ-10 |
| Convertible Roth bracket welded to a band without a lingual cleat. Torque 25, angulation 0, mesial rotation 5. Banding of lower first molars is often easier and more accurate than bonding in cases with limited bonding access. Use this band in non-extraction or first bicuspid extraction cases with skeletal closed bites and class I, class III, or mild class II (2mm or less) occlusions. Do not use this bracket in lower 5 extraction cases, when significant class II elastics are planned, when cinchback mechanics on heavy archwires are expected, and if the molar needs to be uprighted. Other variations will give better results, with less unwanted tooth movements. Conversion of the buccal tube to a bracket is made with the bracket conversion tool, and should be done when the second molars (7s) are banded and heavy wires are engaged. Conversion of the tube must be completed before the start of finishing to allow finishing bends to be made and the archwire removed for further adjustment. |
| *You must be a registered customer to view pricing* |
| |
| |
|
|
|
|
36R2-11
LL 1ST MOLAR BAND, CONVERTIBLE TUBE SZ-11 |
| Convertible Roth bracket welded to a band without a lingual cleat. Torque 25, angulation 0, mesial rotation 5. Banding of lower first molars is often easier and more accurate than bonding in cases with limited bonding access. Use this band in non-extraction or first bicuspid extraction cases with skeletal closed bites and class I, class III, or mild class II (2mm or less) occlusions. Do not use this bracket in lower 5 extraction cases, when significant class II elastics are planned, when cinchback mechanics on heavy archwires are expected, and if the molar needs to be uprighted. Other variations will give better results, with less unwanted tooth movements. Conversion of the buccal tube to a bracket is made with the bracket conversion tool, and should be done when the second molars (7s) are banded and heavy wires are engaged. Conversion of the tube must be completed before the start of finishing to allow finishing bends to be made and the archwire removed for further adjustment. |
| *You must be a registered customer to view pricing* |
| |
| |
|
|
|
|
36R2-12
LL 1ST MOLAR BAND, CONVERTIBLE TUBE SZ-12 |
| Convertible Roth bracket welded to a band without a lingual cleat. Torque 25, angulation 0, mesial rotation 5. Banding of lower first molars is often easier and more accurate than bonding in cases with limited bonding access. Use this band in non-extraction or first bicuspid extraction cases with skeletal closed bites and class I, class III, or mild class II (2mm or less) occlusions. Do not use this bracket in lower 5 extraction cases, when significant class II elastics are planned, when cinchback mechanics on heavy archwires are expected, and if the molar needs to be uprighted. Other variations will give better results, with less unwanted tooth movements. Conversion of the buccal tube to a bracket is made with the bracket conversion tool, and should be done when the second molars (7s) are banded and heavy wires are engaged. Conversion of the tube must be completed before the start of finishing to allow finishing bends to be made and the archwire removed for further adjustment. |
| *You must be a registered customer to view pricing* |
| |
| |
|
|
|
|
36R2-13
LL 1ST MOLAR BAND, CONVERTIBLE TUBE SZ-13 |
| Convertible Roth bracket welded to a band without a lingual cleat. Torque 25, angulation 0, mesial rotation 5. Banding of lower first molars is often easier and more accurate than bonding in cases with limited bonding access. Use this band in non-extraction or first bicuspid extraction cases with skeletal closed bites and class I, class III, or mild class II (2mm or less) occlusions. Do not use this bracket in lower 5 extraction cases, when significant class II elastics are planned, when cinchback mechanics on heavy archwires are expected, and if the molar needs to be uprighted. Other variations will give better results, with less unwanted tooth movements. Conversion of the buccal tube to a bracket is made with the bracket conversion tool, and should be done when the second molars (7s) are banded and heavy wires are engaged. Conversion of the tube must be completed before the start of finishing to allow finishing bends to be made and the archwire removed for further adjustment. |
| *You must be a registered customer to view pricing* |
| |
| |
|
|
|
|
36R2-14
LL 1ST MOLAR BAND, CONVERTIBLE TUBE SZ-14 |
| Convertible Roth bracket welded to a band without a lingual cleat. Torque 25, angulation 0, mesial rotation 5. Banding of lower first molars is often easier and more accurate than bonding in cases with limited bonding access. Use this band in non-extraction or first bicuspid extraction cases with skeletal closed bites and class I, class III, or mild class II (2mm or less) occlusions. Do not use this bracket in lower 5 extraction cases, when significant class II elastics are planned, when cinchback mechanics on heavy archwires are expected, and if the molar needs to be uprighted. Other variations will give better results, with less unwanted tooth movements. Conversion of the buccal tube to a bracket is made with the bracket conversion tool, and should be done when the second molars (7s) are banded and heavy wires are engaged. Conversion of the tube must be completed before the start of finishing to allow finishing bends to be made and the archwire removed for further adjustment. |
| *You must be a registered customer to view pricing* |
| |
| |
|
|
|
|
36R2-15
LL 1ST MOLAR BAND, CONVERTIBLE TUBE SZ-15 |
| Convertible Roth bracket welded to a band without a lingual cleat. Torque 25, angulation 0, mesial rotation 5. Banding of lower first molars is often easier and more accurate than bonding in cases with limited bonding access. Use this band in non-extraction or first bicuspid extraction cases with skeletal closed bites and class I, class III, or mild class II (2mm or less) occlusions. Do not use this bracket in lower 5 extraction cases, when significant class II elastics are planned, when cinchback mechanics on heavy archwires are expected, and if the molar needs to be uprighted. Other variations will give better results, with less unwanted tooth movements. Conversion of the buccal tube to a bracket is made with the bracket conversion tool, and should be done when the second molars (7s) are banded and heavy wires are engaged. Conversion of the tube must be completed before the start of finishing to allow finishing bends to be made and the archwire removed for further adjustment. |
| *You must be a registered customer to view pricing* |
| |
| |
|
|
|
|
36R2-16
LL 1ST MOLAR BAND, CONVERTIBLE TUBE SZ-16 |
| Convertible Roth bracket welded to a band without a lingual cleat. Torque 25, angulation 0, mesial rotation 5. Banding of lower first molars is often easier and more accurate than bonding in cases with limited bonding access. Use this band in non-extraction or first bicuspid extraction cases with skeletal closed bites and class I, class III, or mild class II (2mm or less) occlusions. Do not use this bracket in lower 5 extraction cases, when significant class II elastics are planned, when cinchback mechanics on heavy archwires are expected, and if the molar needs to be uprighted. Other variations will give better results, with less unwanted tooth movements. Conversion of the buccal tube to a bracket is made with the bracket conversion tool, and should be done when the second molars (7s) are banded and heavy wires are engaged. Conversion of the tube must be completed before the start of finishing to allow finishing bends to be made and the archwire removed for further adjustment. |
| *You must be a registered customer to view pricing* |
| |
| |
|
|
|
|
36R2-17
LL 1ST MOLAR BAND, CONVERTIBLE TUBE SZ-17 |
| Convertible Roth bracket welded to a band without a lingual cleat. Torque 25, angulation 0, mesial rotation 5. Banding of lower first molars is often easier and more accurate than bonding in cases with limited bonding access. Use this band in non-extraction or first bicuspid extraction cases with skeletal closed bites and class I, class III, or mild class II (2mm or less) occlusions. Do not use this bracket in lower 5 extraction cases, when significant class II elastics are planned, when cinchback mechanics on heavy archwires are expected, and if the molar needs to be uprighted. Other variations will give better results, with less unwanted tooth movements. Conversion of the buccal tube to a bracket is made with the bracket conversion tool, and should be done when the second molars (7s) are banded and heavy wires are engaged. Conversion of the tube must be completed before the start of finishing to allow finishing bends to be made and the archwire removed for further adjustment. |
| *You must be a registered customer to view pricing* |
| |
| |
|
|
|
|
36R2-18
LL 1ST MOLAR BAND, CONVERTIBLE TUBE SZ-18 |
| Convertible Roth bracket welded to a band without a lingual cleat. Torque 25, angulation 0, mesial rotation 5. Banding of lower first molars is often easier and more accurate than bonding in cases with limited bonding access. Use this band in non-extraction or first bicuspid extraction cases with skeletal closed bites and class I, class III, or mild class II (2mm or less) occlusions. Do not use this bracket in lower 5 extraction cases, when significant class II elastics are planned, when cinchback mechanics on heavy archwires are expected, and if the molar needs to be uprighted. Other variations will give better results, with less unwanted tooth movements. Conversion of the buccal tube to a bracket is made with the bracket conversion tool, and should be done when the second molars (7s) are banded and heavy wires are engaged. Conversion of the tube must be completed before the start of finishing to allow finishing bends to be made and the archwire removed for further adjustment. |
| *You must be a registered customer to view pricing* |
| |
| |
|
|
|
|
36R2-19
LL 1ST MOLAR BAND, CONVERTIBLE TUBE SZ-19 |
| Convertible Roth bracket welded to a band without a lingual cleat. Torque 25, angulation 0, mesial rotation 5. Banding of lower first molars is often easier and more accurate than bonding in cases with limited bonding access. Use this band in non-extraction or first bicuspid extraction cases with skeletal closed bites and class I, class III, or mild class II (2mm or less) occlusions. Do not use this bracket in lower 5 extraction cases, when significant class II elastics are planned, when cinchback mechanics on heavy archwires are expected, and if the molar needs to be uprighted. Other variations will give better results, with less unwanted tooth movements. Conversion of the buccal tube to a bracket is made with the bracket conversion tool, and should be done when the second molars (7s) are banded and heavy wires are engaged. Conversion of the tube must be completed before the start of finishing to allow finishing bends to be made and the archwire removed for further adjustment. |
| *You must be a registered customer to view pricing* |
| |
| |
|
|
|
|
36R2-20
LL 1ST MOLAR BAND, CONVERTIBLE TUBE SZ-20 |
| Convertible Roth bracket welded to a band without a lingual cleat. Torque 25, angulation 0, mesial rotation 5. Banding of lower first molars is often easier and more accurate than bonding in cases with limited bonding access. Use this band in non-extraction or first bicuspid extraction cases with skeletal closed bites and class I, class III, or mild class II (2mm or less) occlusions. Do not use this bracket in lower 5 extraction cases, when significant class II elastics are planned, when cinchback mechanics on heavy archwires are expected, and if the molar needs to be uprighted. Other variations will give better results, with less unwanted tooth movements. Conversion of the buccal tube to a bracket is made with the bracket conversion tool, and should be done when the second molars (7s) are banded and heavy wires are engaged. Conversion of the tube must be completed before the start of finishing to allow finishing bends to be made and the archwire removed for further adjustment. |
| *You must be a registered customer to view pricing* |
| |
| |
|
|
|
